Brand: Generic
Color: Black
Features:
- TWO HOTENDS THAT ACTUALLY WORK TOGETHER - The Sermoon D3 Pro shares one direct-drive extruder between both nozzles, so switching colors mid-print or laying down dissolvable supports doesn't mean stopping the job. Whether you're running prototypes, multi color models, or production parts overnight, this dual extruder 3d printer just keeps moving. It's what makers, engineers, and small-batch shops pick when a single-nozzle FDM 3d printer keeps holding up the queue.
- PRINTS FAST WITHOUT MAKING A MESS OF IT - Speed is one thing. Clean speed is another. The all-metal hotend pushes 32mm3/s through a hardened steel nozzle and runs up to 300mm/s with input shaping already dialed in, so when you tell this 3d printer to go fast, you still get a finished print that looks like you took your time on it. Multi color 3d printer jobs and large prototypes come off the bed sharp and accurate. No reprints, no wasted filament.
- 60C ENCLOSED CHAMBER FOR THE TOUGH STUFF - ABS, ASA, polycarbonate, PA-CF, PET-CF: the filaments that hold up under stress are also the ones that warp and crack on an open-frame 3d printer. The D3 Pro's heated enclosure stays at 60C, so layers bond properly and parts come out dimensionally accurate instead of curling at the corners. It runs PLA and PETG happily too, but this enclosed 3d printer really earns its keep on carbon fiber, nylons, and anything else that needs a controlled environment.
- LEVELS ITSELF, RELEASES PRINTS WITH A FLEX - No paper-card calibration. No Z offset to dial in. No shimming corners with bits of folded receipt. A strain sensor inside the printhead probes the bed and handles leveling automatically, and the second nozzle auto-offsets in X, Y, and Z so you're not eyeballing alignment either. When the print's done, the flexible build plate bends and the part pops off clean. A 3d printer machine that actually saves time between jobs.
- BUILT FOR REAL PRODUCTION, NOT JUST WEEKENDS - Camera, smart door sensor, HEPA air purifier, filament runout detection, and a 4.3-inch touchscreen - all the stuff you need when prints run 18 hours and you're not sitting next to the machine. Connect over WiFi, USB, or Ethernet and check jobs from your phone. The 290x220x300mm build volume fits full-size functional parts, and the whole setup is what professional 3d printer industrial users and small-batch shops trust for paying work.
Package Dimensions: 21.8 x 22.8 x 25.8 inches
