This virtually invisible, Double-sided Clear Transparent Acrylic Foam Adhesive Tape. is of professional quality. It's designed for attaching items up to two pounds to virtually any smooth wall or surface. It is perfect for discretely mounting items on glass, tile or mirrors. It's Removable and reposition-able, yet strong.
Length: 17.5ft or 5.3m or 5,334mm
Seal skylight inner/outer dome.
Mount back lit translucent signs.
Edge-bond resin filled glass.
Clean: Most substrates are best prepared by cleaning with a 50:50 mixture of isotropyl alcohol (IPA*) and water.
Ideal application temperature range is 70°F to 100°F (21°C to 38°C). Pressure sensitive adhesives use viscous flow to achieve substrate contact area.
Note: Initial tape application to surfaces at temperatures below these suggested minimums is not
recommended because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
After application, the bond strength will increase as the adhesive flows onto the surface (also referred to as “wet out”). At room temperature approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. This flow is faster at higher temperatures and slower at lower temperatures. Ultimate bond strength can be achieved more quickly (and in some cases bond strength can be increased) by exposure of the bond to elevated temperatures (e.g. 150°F [66°C] for 1 hour). Abrasion of the surfaces or the use of
primers/ adhesion promoters can also have the effect of increasing bond strength and achieving ultimate bond strength more quickly.
You Can Also Shop With Us On Amazon or eBay:
Shop With Us On Amazon.
Shop With Us On eBay.